part number: LUO12D t-1 3/4 (5mm) solid state lamp published date : mar 22, 2008 drawing no : sdsa4766 v4 checked : b. l.liu p.1/4 www.sunled.com features z low power consumption. z popular t-1 3/4 diameter package. z general purpose leads. z reliable and rugged. z long life - solid state reliability. z available on tape and reel. z rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3.specifications are subject to change without notice. part number emitting color emitting material lens-color luminous intensity ( if=10ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. LUO12D orange gaasp/gap orange diffused 8 24 627 30 absolute maximum ratings (t a =25c ) uo (gaasp/gap) unit forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 160 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base] 260c for 5 seconds reverse voltage v r 5 v operating characteristics (ta=25c ) uo (gaasp/ gap) unit forward voltage (typ.) (i f =10ma) v f 1.9 v forward voltage (max.) (i f =10ma) v f 2.5 v wavelength of peak emission (typ.) (i f =10ma) p 627 nm wavelength of dominant emission (typ.) (i f =10ma) d 625 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 45 nm capacitance (v f =0v, f=1mhz) c 15 pf reverse current (max.) (v r =5v) i r 10 ua
part number: LUO12D t-1 3/4 (5mm) solid state lamp published date : mar 22, 2008 drawing no : sdsa4766 v4 checked : b. l.liu p.2/4 www.sunled.com ? uo
part number: LUO12D t-1 3/4 (5mm) solid state lamp published date : mar 22, 2008 drawing no : sdsa4766 v4 checked : b. l.liu p.3/4 www.sunled.com remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
part number: LUO12D t-1 3/4 (5mm) solid state lamp published date : mar 22, 2008 drawing no : sdsa4766 v4 checked : b. l.liu p.4/4 www.sunled.com packing & label specifications LUO12D
|
